MODEL B350A GRAVITY FEED AUTOMATIC SLICER
The BIRO B350A is designed to provide trouble free service in a WET MEAT ROOM ENVIRONMENT. Features such as Water Resistant Motor, Electrical Components and Connections, plus Non-Corrosive Metals, all add to the water protection benefits of the slicer. With THREE AUTOMATIC SPEEDS, the Operator can select the position best suited for the products being sliced or can be used in the MANUAL POSITION for a minimal number of slices to be cut.
• BLADE – 13-3/4″ (350mm) Hollow Ground Alloy Steel has a special (patented) design to relieve surface suction on wet products and will allow a slicing capacity of 9.5″ on round products. The THICKNESS CONTROL allows cuts from 0 to 1″ (25mm) with indicator positions shown on the Index Knob in one millimeter increments allowing precise slice consistency.
• DESIGN – Minimum number of removable parts allow for EASY CLEAN UP while the ergonomic and EASY-GLIDE CARRIAGE allows no resistance during the need for a manual operation. The Automatic operation provides an auto piece count selection from 0-99 pieces with automatic shut-off.
• BUILT-IN SAFETY FEATURES – Blade Protective ring guard prevents exposing the blade’s edge when the blade cover is removed for cleaning. Product table lockouts prevent the thickness gauge from being opened during cleaning. Emergency shut-off and thermal overload/no volt release prevents accidental turn on after power outages. Remote sharpener mounts easily when needed but is stored away from the slicer when not in use, providing added hygiene security to the slicing operation.
B350A GRAVITY FEED AUTOMATIC SLICER
BODY – ANODIZED POLISHED ALUMINUM CAST WITH NON-CORROSIVE METAL FRAME
IP 65 – 1/2 HP (.35 KW) 115V 60 HZ -1 INTERNALLY COOLED. (STANDARD U.S.A. VOLTAGE)
BLADE – 13-3/4″ (350MM) HOLLOW GROUND ALLOY STEEL – 200 RPM OVERSIZED PRODUCT TABLE 13-1/4″ (337MM) WIDE BY 12-1/2″ (318MM) LONG, MAXIMUM PRODUCT CUT – ROUND 9-1/2″ (241MM), MAXIMUM PRODUCT CUT – RECTANGULAR 11-3/4′ X 6″ (298 X 152MM), MAXIMUM PRODUCT CUT – SQUARE 7-1/4″ X 7-1/4″ (184 X 184MM), AUTOMATIC SPRING LOADED BELT TENSIONING, BLADE PROTECTIVE RING GUARD PREVENTS EXPOSED BLADE EDGE DURING CLEANING, TILT-AWAY PRODUCT TABLE LOCKOUT PREVENTS THICKNESS GAUGE FROM BEING OPENED DURING CLEANING, THERMAL OVERLOAD/NO VOLT RELEASE PREVENTS ACCIDENTAL TURN ON AFTER POWER OUTAGES, GREEN PUSHBUTTON ON/OFF CONTROL AND RED E-STOP BUTTON, POLYGROOVE BELT DRIVE PROVIDING OPTIMUM PERFORMANCE, WATER RESISTANT IP 65 MOTOR, WIRING HARNESS, ELECTRONIC CONTROLS, CONNECTORS, PRODUCT FENCE – FOR USE ON NARROW PRODUCTS
AUTOMATIC SPEED #1
SHORT STROKE 48 PER. MIN., MEDIUM STROKE 40 PER. MIN., LONG STROKE 38 PER. MIN.
AUTOMATIC SPEED #2
SHORT STROKE 56 PER. MIN., MEDIUM STROKE 45 PER. MIN., LONG STROKE 45 PER. MIN.
AUTOMATIC SPEED #3
SHORT STROKE 60 PER. MIN., MEDIUM STROKE 50 PER. MIN., LONG STROKE 50 PER. MIN.
NSF, ETL (U.S.), ETLC (Canada), CE (optional)
UNCRATED – 106 LBS. / 48 KG. CRATED – 121 LBS. / 55 KG.
UNCRATED – OVERALL DEPTH 30-1/2″ (775MM) OVERALL WIDTH 24″ (610MM) OVERALL HEIGHT 35-1/2″ (901MM)
VEGETABLE CHUTE 8-1/4″ (209MM) DIAMETER