MODELS 44SS STAINLESS STEEL STANDARD AND 44SSLP STAINLESS STEEL LOW PROFILE POWER MEAT SAWS
The BIRO Models 44SS Stainless Steel Standard and 44SSLP Stainless Steel Low
44SS / 44SSLP Power Meat Cutter 18” (457 mm) saw blade wheels.
DP = Drip Proof TE = Totally Enclosed MR = Moisture Resistant STD = Standard EC = Extra Cost
Stainless steel head and base structure.
Two saw blades, operation and parts manual, safety wall poster, end cut safety pusher plate.
Watertight magnetic with thermal overload and under voltage protection.
Head and Door:
Stainless steel head, movable, door removable.
Hard tooth, three teeth per inch (8.5 mm between teeth),135” (3429 mm) long x 5/8” (16 mm) wide, .022” (.56 mm) thick (two supplied with each saw). On 44SSLP, same as above except 124” (3149 mm) long x 0.14” (36 mm) thick.
Std. 4000 feet (1219 m) per minute approx. / 44SSLP 5000 feet (1524 m) per minute approx.
Blade Back-up Guides:
Upper and lower blade backup guide assemblies,
Ratchet arm and cam against pound tested spring and tension spring gauge.
18” (457 mm) cast iron, chrome nickel plating, upper wheel assembly lifts out.
Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.
Poly, extra deep (rounded corners) pan sealed off from other parts of base, accessible through base hinged door.
Stainless steel body, long life carbide guide insert, steel saw cleaners, removable as a unit for easy cleaning (assembly also adjustable as a unit).
Non slip silent v-belt, tension adjustable.
Four stainless steel leg bolt levelers.
Stainless steel with eight stainless steel bearings, e-z flow.
Meat Gauge Plate:
Stainless steel faced, adjustable from 1/16” (1.59 mm) to 6-1/2” (165 mm) locks in position, can be disengaged, entire assembly removable for cleaning. On 44SSLP, optional precision thickness gauge fence.
Sealed off from meat contact areas, easily accessible through removable panel door.
All stainless steel, held in place with two push pull hold down stainless steel rods. On 44SSLP, split rear platter is standard.
Safety End Cut Pusher Plate:
Standard, removable, pusher plate storage hanger provided.
Power cord and plug, stationary front table, double saw guide bar, low profile head (shown), 1” wide saw blade system, left hand feed, double moving carriage, roller tops, double flange cast blade wheels, narrow guides for .018/0.46 mm thick blade, split (2 pc) rear stationary platter, micro gauge assembly (not shown in photo, see drawing), longer meat gauge plates, meat gauge plate stabilizer, stainless steel single flange cast blade wheels.
Higher blade speed, 5000 feet (1524 m), 6000 feet (1829 m) per minute.
U.S.D.A., U.L., N.S.F., C.F.I.A. (C.S.A., STD., DP, 3HP-230-60-3)
Uncrated: 600 lbs. (272 kg) approximate. Crated:700 lbs (317 kg) approximate.
L=54” (137.2 cm), W=45” (114.3 cm), H=38” (96.5 cm).